The reason I developed this, is because the other snap together frames could not fit the picture canvas, I was using to print pictures with my Eufy Make E1. The pictures had a frame depth of 16mm, and most of the frames could only support up to 6mm.

Allows for custom Frames to be generated for different size pictures and different depths.

Currently this version is limited to the size of your printer's bed size, but this will change with a newer version in development.

Create Frames for any size, and any depth of picture.

You can also apply a texture to the Frame. This is currently limited by the inbuild textures of the Openscad Software. But I'm developing a way for custom images to be used for the frame sides.

Current Textures are: bricks, checkers, cones, pyramids, cubes, hex_grid, tri_grid

The front lip size can also be defined as well as how thick you want it. 

If there are any issues or you want a tweak to the Generator, please contact me.

Below is an image of the Lengths for measuring.

red = Frame Width 

Blue = Picture Depth 

Green = Lip Width

Magenta = Lip Depth

Update 1.1.0 - 4/24/26

• Web site set up, which offers more functionality.
  • Allows Image upload
  • Tiling of Image and controlling of image display.
• [https://framegenerator.studio/](https://framegenerator.studio/)

Update 1.0.3 - 1/11/26

• Fixed naming and header confusions. Renamed and added a comment to show what is what.

Update 1.0.2 - 1/10/26

• Fixed an issue where the clip hole was moved to the wrong location if you have 2 nail holes.
• Deepened the hole for the nail.
• Tweaked positioning placement of items, especially on sides which are larger than the plate size and are rotated.

Update 1.0.1 - 1/9/26

• Updated to rotate the frame pieces if they are longer than the plate size, but less than the diagonal. This means larger Frames can be printed.