This is a parametric mounting bracket for mini PCs to hang your device from a bar or monitor stand/bracket for example . I originally designed this for a Mac mini, but if you measure your device (Intel NUC, Mac Studio and others), it's easy to adapt it to your needs.

I'm including the profile for the Mac Mini for which I originally designed this mounting bracket and a reference for the dimensions from apple.

Customisation Instructions:

• When customising the width and height, I would advise adding ~1-2mm extra to account for the curvature of the fillets at the base of the side grippers.
• The offset from the top parameter adjusts how much your device will be above the holding bracket. But if set to be larger from the mounting bar thickness it will behave in a strange way.

Printing Instructions:

• Use 3mf file from the uploaded profile and import your model so that you don't need to play with settings.
• I would strongly advise for the model to be printed on the side orientation so that the print lines are parallel with the gravity once mounted. This should provide more strength.
• Adjust the wall thickness for heavier objects if needed.

Let me know if there is any additional parameter you want me to include.

Hope this helps you.