Inspired by the Dulton Double Sided Wall Clock

This model can be mounted on a wall or on an IKEA SKÅDIS pegboard.
For IKEA SKÅDIS mounting, an additional adapter is included in the print files.

Requirements

• 2 standard clock movements
  I used clock movements with an 18 mm shaft.
  The position of the clock movement can be adjusted using the additional filler included in the 3D print files.
  The filler is 4 mm thick by default, but you can modify its thickness to fine-tune the final depth and alignment of the clock.
• 3 × M5 × 20 mm bolts
• 3 × M5 inserts or nuts

Optional

• Magnets can be added for extra holding strength, but in my case they were not necessary.