After seeing a video(check below) about turning a BC 250 card into a Steam OS PC I bought one to mess around with and decided to make a case. This is my first major design so it's a little rough, but works well. I used PETG to print. I have a Bambu P1S so the bed isn't huge so broke it up into 4 interlocking parts. I hope you like it!

Parts list:

PSU I used: [https://www.amazon.com/dp/B0CWN59YCZ?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B0CWN59YCZ?ref=ppx_yo2ov_dt_b_fed_asin_title)

PSU Jumper: [https://www.amazon.com/dp/B09CT38FDJ?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B09CT38FDJ?ref=ppx_yo2ov_dt_b_fed_asin_title)

Wifi/Bluetooth: [https://www.amazon.com/dp/B0CZ82RM5L?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B0CZ82RM5L?ref=ppx_yo2ov_dt_b_fed_asin_title)

NVME: any normal size one you can find

Fans: any standard PC fans will work, like these: [https://www.amazon.com/Thermalright-TL-C12C-X3-Computer-Quantities%EF%BC%89/dp/B0BKL1QYP3/ref=pd_sbs_d_sccl_2_4/130-2544115-5954362?pd_rd_w=L97Yb&content-id=amzn1.sym.2cd14f8d-eb5c-4042-b934-4a05eafd2874&pf_rd_p=2cd14f8d-eb5c-4042-b934-4a05eafd2874&pf_rd_r=Z7AZK87FNSKKRE5F8KSN&pd_rd_wg=qxTqu&pd_rd_r=8e9b11c7-6f0c-4ef1-9c6d-65885198b11c&pd_rd_i=B0BKL1QYP3&psc=1](https://www.amazon.com/Thermalright-TL-C12C-X3-Computer-Quantities%EF%BC%89/dp/B0BKL1QYP3/ref=pd_sbs_d_sccl_2_4/130-2544115-5954362?pd_rd_w=L97Yb&content-id=amzn1.sym.2cd14f8d-eb5c-4042-b934-4a05eafd2874&pf_rd_p=2cd14f8d-eb5c-4042-b934-4a05eafd2874&pf_rd_r=Z7AZK87FNSKKRE5F8KSN&pd_rd_wg=qxTqu&pd_rd_r=8e9b11c7-6f0c-4ef1-9c6d-65885198b11c&pd_rd_i=B0BKL1QYP3&psc=1)