This is a 3D printable USB Arcade Controller Box designed to house standard USB arcade controller boards with six JST-SM 2-pin connector holes. The model focuses on clean cable management and easy installation for DIY arcade and sim-rig projects.

Features

• 6× JST-SM 2-pin connector cutouts
• Clean internal layout for arcade encoder boards
• Designed for cable-based JST-SM connectors (commonly used with LED strips and arcade wiring)
• Suitable for arcade panels, button boxes, and custom USB controllers

Connector Reference

This model is designed around JST-SM 2-pin cable connectors, such as the type used in Powermaster IC-261J JST-SM 2-Pin connector kits.
Amazon US reference (example listings):
[https://www.amazon.com/s?k=jst+sm+2+pin](https://www.amazon.com/s?k=jst+sm+2+pin)

Mounting Hardware (Important)

To securely fix the arcade controller board inside the box:

• Required screws: M3 × 10 mm
• The internal mounting holes are sized specifically for M3 screws
• No glue required — mechanical mounting only

Recommended Print Settings

• Material: PLA or PETG
• Layer height: 0.2 mm
• Infill: 20–30%
• Supports: Yes (depending on printer orientation)
• Nozzle: 0.4 mm