I allways had the issue that with soft pouches i could never reinsert the mags properly, so i took inspiration from a product from aliexpress called magazine kydex inserts. These were basically the same thing just with the issue of being to short for most pouches including mine. Therefor i created these and they work like they should. You can also modify them to work for bigger mags like m4s for m4 mags i would recommend 175% on the z-axis. This is my first project so let me know if it work or if you have any ideas for upgrades. I used PLA for mine and they work, but in hotter temps pla might stuggle, so i have heard at least. If i run into any issues ill post a update. The second plate has some little feet for more retention and the 3rd has a little spacer to prevent the pouches from closing the inserts to much (5th picture shows them between the inserts)