New Jersey Devils: Hex Coaster 

This coaster design is inspired by the New Jersey Devils, featuring three separate parts: the logo, a hex background, and the base. I designed it this way to minimize or even eliminate the need for color changes during printing. The separate base also allows you to experiment with different filament colors for a clean, contrasting outline.

Included Print Profiles:

• Combined Parts: Print all parts together.
• Separate Parts: Print all parts separately (No AMS)
  • For the Separate Parts print profile: print the logo pieces separately and glue or press-fit them into the hex background. The logo pieces are designed to fit together snugly—it’s a tight fit. I found it easiest to assemble the logo pieces first, then insert the completed logo into the hex background.
  • If the fit is tight, use something flat and hard to evenly press the logo into place, or flip the coaster upside down and press firmly against a solid surface to seat the logo fully. You can use glue if the fit isn’t very tight, but it’s not needed if the logo fits snugly.

Dimensions: 100 x 100 x 4.2 mm

Recommended Print Settings:

• Layer Height: 0.2 mm
• Infill: 10%–20%
• Infill Pattern: Gyroid

Filaments Used:

• Bambu Basic PLA Jade White
• Bambu Basic PLA Red
• Bambu Basic PLA Black

Notes:

• The hex background piece fits snugly into the base without glue, so you can separate the pieces if you want. However, if you prefer a permanent finish, the hex piece can be glued into the base.
• Feel free to scale this model to any size you like — just be sure to scale all parts equally to keep them compatible.

Please do not sell. This is fan art and not licensed by the New Jersey Devils or the NHL.