Calgary Flames: Hex Coaster 

This coaster design is inspired by the Calgary Flames, featuring three separate parts: the logo, a hex background, and the base. I designed it this way to minimize or even eliminate the need for color changes during printing. The separate base also allows you to experiment with different filament colors for a clean, contrasting outline.

Included Print Profiles:

• Combined Parts: Print all parts together.
• Separate Parts: Print all parts separately (No AMS)
  • For the Separate Parts print profile: print the logo pieces separately and glue or press-fit them into the hex background. The logo pieces are designed to fit together snugly—it’s a tight fit. I found it easiest to assemble the logo pieces first, then insert the completed logo into the hex background.
  • If the fit is tight, use something flat and hard to evenly press the logo into place, or flip the coaster upside down and press firmly against a solid surface to seat the logo fully. You can use glue if the fit isn’t very tight, but it’s not needed if the logo fits snugly.

Dimensions: 100 x 100 x 4.2 mm

Recommended Print Settings:

• Layer Height: 0.2 mm
• Infill: 10%–20%
• Infill Pattern: Gyroid

Filaments Used:

• Bambu Basic PLA Jade White
• Bambu Basic PLA Orange
• Bambu Basic PLA Black
• Bambu Basic PLA Red

Notes:

• The hex background piece fits snugly into the base without glue, so you can separate the pieces if you want. However, if you prefer a permanent finish, the hex piece can be glued into the base.
• Feel free to scale this model to any size you like — just be sure to scale all parts equally to keep them compatible.

Please do not sell. This is fan art and not licensed by the Calgary Flames or the NHL.