A fully modular wall mounted corner rack in the UZ Stack series for filament spools and other tools and accessories. It's designed for easy mounting and adaptation for your needs. This is designed to fit perfectly in 90° corners.

The spool holders for this model can be found here.

UZ Stack

This is the third model in the UZ Stack series, and more are on the way. The UZ Stack series models are different kinds of practical and modular designs where the parts fit across different models. My goal is an extensive ecosystem of models with practical application where parts can be moved around and easily swapped out to customize your current needs.

• UZ Stack Rotating Floor Stand
• UZ Stack Wall Rack
• UZ Stack DeWalt Tool Holders
• All UZ Stack Models

Mounting

The screw holes are 5 mm in diameter and have room for a screw head of up to 10 mm diameter, hole depth 16 mm. They have dimensions to perfectly fit standard decking screws, ex. 4.5 x 60 mm or shorter. Between each piece you use two small pins to align everything and there are two different end-pieces to choose from. When stacking them i have only used one pair of screws in each module and don't think you need to use all the screw holes.

Printing

• 0.2 mm layer height
• 15% rectilinear infill
• Tested and printed in PLA
• Calibrate the filament and clean the print plate for a perfect result :-)
• Printing the 4-slot module requires the use of both nozzles on an H2x printer

Have fun c",)