Nozzle for Cleaning Robot Vacuum Filters

This is a specially designed vacuum cleaner nozzle for effective cleaning of robot vacuum filters. The nozzle attaches directly to a standard vacuum cleaner hose and is used to remove dust, dirt, and fine particles that accumulate in the robot vacuum filter over time.

The angled and wide design allows the nozzle to cover a large filter surface at once, providing fast, even, and gentle cleaning without damaging the filter material. Ideal for regular maintenance that extends the filters lifespan and helps the robot vacuum maintain optimal suction performance. 

One Size is 140mm x 45mm.

Inside diameter on top is 31.8 mm.

And on another print profile have 125mm x 45mm 

And with inside diameter on top of 34mm.

Check my container for Robot Vacuum Cleaner here! 

Features:

• Designed for cleaning robot vacuum filters.
• Used together with a standard vacuum cleaner.
• Effective removal of dust and fine particles.
• Angled and wide opening for optimal coverage.
• Gentle cleaning without brushes or water.
• 3D print friendly design, easy to print and use.

Recommended Print Settings:

• Material: PLA or PETG (PETG recommended for higher durability).
• Layer height: 0.2 mm.
• Infill: 15–25% Gyroid.
• Walls/Perimeters: 2.
• Supports: Not required.
• Print orientation: Print with the hose connection facing down.
• Brim: Optional, for improved bed adhesion.

A smart accessory for anyone who wants to extend the lifespan of robot vacuum filters, improve cleaning performance, and reduce the need for frequent filter replacements.