Just a simple measuring gauge for Eldfall Chronicles.
Includes notches for 2.5 inch and 1.5 inch measurements.

A second model is included with a 0.1 mm text depth, designed for easy coloring.
This allows the model to be colored as desired while still printing in a single layer.

The model can be colored for AMS using the built-in painting tool in Bambu Studio.

Also including models without Eldfall Chronicles logo.

Important printing note (for text facing down):
When printing with the text facing the build plate, lower the model by one layer below the bed level.
This ensures the colored layer is printed flush and evenly.

Printing tip:
Leave the print on the bed until fully cooled to avoid warping.

File descriptions

• Eldfall_Measuring_Gauge_05mm.stl
  Single-sided text
  0.5 mm text depth
  No AMS required
• Eldfall_Measuring_Gauge_01mm_AMS.stl
  Single-sided text
  0.1 mm text depth
  Lower the model by one layer when printing text-down
• Eldfall_Measuring_Gauge_01mm_AMS_DS.stl
  Double-sided text
  0.1 mm text depth
  Lower the model by one layer when printing text-down

Disclaimer:
The Eldfall Chronicles logo and all related trademarks are the property of their respective owner(s).
This model is a fan-made, non-commercial project created for personal and educational purposes only.
No ownership of the logo is claimed, and no copyright infringement is intended.