Full model description (paste into Description / Documentation) Overview

• Cute Cubed Cat (15/50) is a low-poly, stylized cat sculpture with a compact, cubed aesthetic. Designed to be a quick, friendly print ideal for desktop decor, keychain-sized collectibles, or painting practice.

Key features

• Single-piece model — no assembly required
• Low-poly cubed style for a modern, playful look
• Minimal overhangs — prints easily with few supports
• Scales well for small figurines up to display statues
• Good for painting, weathering, or multi-color prints (by filament changes or painting)

Recommended print settings (starting point)

• Layer height: 0.12–0.24 mm (0.12–0.16 for fine detail; 0.2–0.24 for faster prints)
• Infill: 10–20% (higher if you want a heavier/tactile feel)
• Walls/perimeters: 2–3
• Print speed: 40–60 mm/s
• Supports: Generally not required for default orientation; enable small supports if you scale very large or orient differently
• Bed adhesion: Skirt or small brim if you see first-layer issues

Material recommendations

• PLA: easiest, best for colorful or painted finishes
• PETG: more durable and slightly glossy
• TPU (soft variant): experiment at larger scales for a squishy figure (may need model adjustments)
• Paint/finish: acrylics work well; primer + thin coats for best results

Scaling & remix tips

• When scaling up, increase perimeters/wall thickness or infill to keep rigidity.
• Consider adding a small flat base or peg if you want it to stand more securely.
• Remixes: try hollowing (with drain holes) for very large prints, or split into parts for multi-color prints.

Post-processing

• Light sanding on edges for a smoother finish if desired
• Primer + acrylic paint for crisp color work
• Use superglue for any added small accessories