🛑 STOP DOING GRID MATH!

The Ultimate Gridfinity Drawer-Filling Baseplate Generator

Put away the calculator. This generator creates perfectly sized Gridfinity Baseplates that fill your drawer edge-to-edge, automatically calculating the perfect grid size and margins for you.

🔥 Key Features

New: Grid Shifting

Choose to shift the grid to a side or corner

Vertical Stacking (Batch Printing)

Want to print multiple plates at once?

• Zero Supports Needed: Select "All Upside Down" mode to print perfectly bridging inverted stacks.
• Mass Production: Set Stack_Count to 5, 10, or more and wake up to a full drawer's worth of frames!
• Easy Separation: Designed with a tuned 0.2mm air gap—parts snap apart cleanly.

✨ Zero Math Required

Just enter your drawer dimensions (mm or inches). The script calculates the optimal row/column count and generates equal margins on all sides instantly.

🧱 Robust Frame Design

• Integrated Spacers: Margins are fused to the frame—no loose spacer sticks!
• 1.0mm Reinforced Webs: We optimized the geometry for maximum printability. Say goodbye to slicer errors on split edges.
• Skeleton Mode: Save ~50% filament with the lightweight, rigid frame option.

✂️ Auto-Tiling

Drawer bigger than your printer? No problem. The script automatically splits giant baseplates into clean tiles that fit your specific bed (Bambu X1/P1/A1, A1 Mini, Prusa MK3/4, etc.).

🛠️ How to Use

Basic Usage (Single Plate)

1. Measure: Input your drawer's internal Width and Depth.
2. Profile: Select your printer model (e.g., "Bambu P1/X1") for correct auto-tiling.
3. Style: Choose "Standard" (Solid) or "Skeleton" (Frame).
4. Print: Slice and print!

🚀 Batch Printing (Stacking)

Print a drawer's worth of frames in one go!

1. Set Style: Must use "Skeleton" or "Borderless" mode.
2. Stack Count: Set how many plates you want (e.g., 5 or 10).
3. Stacking Mode: Select "All Upside Down".
   • Why? This orients all plates rims-down, creating perfect bridges without supports.
4. Check Safety: The script automatically disables magnets/screws in this mode to prevent print failures.
5. Print Settings:
   • Layer Height: 0.2mm.
   • Supports: None (Disabled).
   • Brim: Recommended/Mouse Ears for stability.

📢 Support the Project

• Post Your Makes: I love seeing your organized drawers!
• Feedback: Have an idea? Leave a comment!
• Boost: Seriously, it helps a ton. Thank you!

Attribution

Based on the Gridfinity modular storage system designed by Zack Freedman.

• Original System: Thangs Profile
• Support Zack: YouTube Channel

Licensed under the MIT License. Created by DannyDorito