Hello creatives! 👋

Introducing the model: 💝 LED Studio Spotlight Lamp with tripod 💝. The model is designed for ✨ LED KIT 001 from Bambulab✨ . 

✨✨✨ This model can be used as a decorative lamp on a work desk, to illuminate design objects in the interior or as a studio light for illuminating models ✨✨ Height of the built model including tripod cca. 34cm✨.

UPDATE 1.1.2026:

in the third print profile, the LED Studio Spotlight Lamp update is uploaded. This update consists of modifying the rear part of the reflector body into which an E14 lamp holder can be inserted. The complete set that I used was purchased at OBI and I am attaching a link to this set:

[https://www.obi.cz/instalace-svitidel/kompletni-sada-pro-osvetleni-e14-bila/p/5585344?wt_mc=gs.pla.Technika.Elektroinstalace.Instalacesvitidel&wt_cc1=20798671390&wt_cc4=c&wt_cc9=156054659659&gad_source=1&gad_campaignid=20798671390&gbraid=0AAAAADk-hbF_NBmWE7OQgoUwLihjOQH28&gclid=CjwKCAiA09jKBhB9EiwAgB8l-NFL70bfOB9xLsLELcxeJvclJHZPlCaEnNxTJmlO7bZ6eF9-9QnfKhoCwjcQAvD_BwE](https://www.obi.cz/instalace-svitidel/kompletni-sada-pro-osvetleni-e14-bila/p/5585344?wt_mc=gs.pla.Technika.Elektroinstalace.Instalacesvitidel&wt_cc1=20798671390&wt_cc4=c&wt_cc9=156054659659&gad_source=1&gad_campaignid=20798671390&gbraid=0AAAAADk-hbF_NBmWE7OQgoUwLihjOQH28&gclid=CjwKCAiA09jKBhB9EiwAgB8l-NFL70bfOB9xLsLELcxeJvclJHZPlCaEnNxTJmlO7bZ6eF9-9QnfKhoCwjcQAvD_BwE)

If you really loved my work, you can always get me a coffee :)
 

🔩 Assembly instructions 🔩:

1🔩) Print both print profiles - the first print profile contains only the lamp, the second print model contains a height-adjustable stand for the lamp.

2🔩) insert the LED light source from Bambulab (led kit 001) into the largest part - the base body

3🔩) insert the decorative ring into the front cover of the light and screw it into the base body. 

4🔩) screw the back cover into the base body, pull the USB cable with the switch through the hole, click and insert the cover that hides the hole through which you pulled the cable.

5🔩) attach the screen to the base body of the lamp using two screws, repeat 4x

6🔩) attach the tripod holder using two screws

This completes the LED Studio Spotlight Lamp setup

Tripod assembly procedure:

7🔩) screw the extension to the base of the tripod

8🔩 ) slide the support leg holder onto the base of the tripod

9🔩) use long screws to connect the legs to the slide-in part and tighten with nuts

10🔩) use short screws to connect the arms to the legs and tighten with nuts

11🔩) use screws to connect the arms to the base of the tripod

12🔩 ) screw the largest screw into the sliding part of the tripod

💝 I hope you will like LED Studio Spotlight Lamp with tripod too! 💝