I designed this universal wall mount for a MOES ZigBee Switch with a standard 3D‑print tolerance of 0.3 mm. The model uses my supplied profile and the chosen positioning was selected intentionally for optimal functionality and installation. The print profil is focused on FDM printer.

Status: Tested and Patched ✅

⭐ Features

• Adhesive recess: Fits adhesive strips ~20 × 1.5 × 90 mm
• Mounting holes: Drill/slotted holes for fine position adjustment; fits screws ≤ 4 mm
• Magnetic recesses: Up to four magnets, each ≤ 11 × 2 mm, for optional magnetic mounting

🛠️ Printing Recommendations

• use my printing and filament profile (PETG or PLA)
• PETG for better stability, PLA for a smoother print result
• Infill: Recommended 10%, pattern Gyroid.
• Walls: 2
• Use supports
• The placement and positioning in the model are deliberate

🔧 Patch Notes

• Version 1.10

  • Tolerance adjustments: Improved print fit and reliability.
  • Perimeters: 2 wall loops for efficient strength.
  • Screws: Holes and countersinks refined — screw heads now fit better.

• Version 1.30 🚀

  • The magnetic hold was too weak, so I moved the holes to the back. The hole depth is 1.9 mm.
  • Thickness of rear side increased for screw head thickness
  • Distances, angles, and fits adjusted.

📜 License & Use

All ZYR‑Design models are released under the Standard Digital File License and are for personal use only. No remixes or derivatives without permission. For commercial licensing or custom requests, please contact me. No commercial permissions are granted during this transition.

🙋 Want a change or custom version?

Message me — I’m happy to adjust sizing, mounting options, or magnet/adhesive layouts.

❤️ Follow & Support

If you like this model, please follow me for more designs and updates — your support helps me keep improving and releasing new prints!