Tired of losing in snowball fights?

The SnowballSlinger is the solution!

With a 3 shot magazine and accurate gum-based firing you can dominate the battlefield!

Just srew on the magazine, load a snowball, aim, and fire!!

Assembly Insructions

1.  Print all parts (the decoration is optional)

   

2. We will start with assembling the main part

3. Take 12 gums (30*15*5mm) and slide 3 in each hook on the side of the sled. Also slide on the handel and make sure it's all the way inserted.

   

4. Slide the sled into the barrel, make sure that the alignment is correct. (The little dent on one of the hooks of the sled should be at the top left. Up being the thread for the magazine)

   

5. Connect the gums to the respective hooks inside the barrel.

   

6. Next we will assemble the magazine

7. Get the magazine parts and snowballs with a diameter of 45-50mm and a weight of about 30g (the blue balls in the picture)

   

8. Insert the snowballs

   

9. Insert the top part like shown

   

10. Screw the magazine on the barrel.

    

11. To shoot, simply pull down the tap on the side until you feel a ball dropping down. Then pull the sled all the way back, until the ball drops down in the barrel. You have now loaded a ball and can let go like a bow to shoot.