Generate your own mesh filter with my parametric mesh filter generator or use few standard diameters

- for most use cases just change diameter
- if diameter is big change ring thickness/height for more stiff filter
- default tolerance is 0.2mm so it's quite tight, for example 0.2mm tolerance and 40mm diameter will result in 39.8mm print
- change wire mesh spacing if you want to have less dense mesh
- mesh wire size can be changed when printing with smaller nozzle or printing big filters which require more solid mesh

I will provide ready print profiles for 30/40/50/60mm filters with fine mesh for air vents etc.

You can also check my air vent generator here:
[https://makerworld.com/pl/models/2135216-air-vent-generator](https://makerworld.com/pl/models/2135216-air-vent-generator)
or rectangular filter mesh:
[https://makerworld.com/pl/models/2146698-dust-filter-generator](https://makerworld.com/pl/models/2146698-dust-filter-generator)

If you want to use it outdoor use at least PETG