Minimalistic Christmas-tree–shaped lamp with a clean, modern look.

Customizable depth: Adjust the lamp’s depth to match your LED strip width, space, or desired glow.
LED strip compatible: Designed for virtually any LED strip. For the smoothest, most even light, I recommend a COB LED strip.

Wide versions tip: If you set the lamp width above 25 mm, I recommend using two rows of LED strips for more uniform brightness and fewer dark spots - use two 90 angles connectors in such case.

Printing recommendations

• Front / Back / Feet: print with standard filament (regular PLA/PETG, etc.).
• Light diffuser (transparent part): print with translucent filament for the best effect (Translucent PLA or Translucent PETG).
  I also got excellent results with transparent PCTG.

Optional mounting helper

You can customize the alignment lip height to make LED strip installation easier and keep the strip neatly positioned during mounting.

Assembly tips

• Cable strain relief: Tie a knot in the LED cable close to the exit point. This helps keep the cable from pulling out and secures it in place.
• Glue (optional): Glue shouldn’t be required, but depending on your printer tolerances/fit, you can add a small amount to secure the top part of the model.