Step into a wild crossover world with this Mega Man x Cuphead mashup model. Designed as a fun blend of retro run-and-gun energy and rubber-hose cartoon style, this multi part print brings two iconic universes together in one dynamic character. With bold shapes, expressive features, and clean color separation, this model is easy to assemble and a blast to display. Whether you're a Mega Man fan, a Cuphead fan, or both, this crossover is ready to jump straight onto your print bed and into your collection.

Dimensions:

• At 100% scale, Mega Cuphead stands approximately 8.27 inches (210 mm) tall. Scaling up should work fine, but scaling down may tighten tolerances and make assembly more difficult.

Colors Used:

• Bambu Basic: Red, Black, White, Gray, Dark Gray

• Bambu Matte: Bone White

   

Assembly Tips

• The triangle pins on the legs should point forward
• Look for the L and R markings on the knees
• Building the straw
  • The long pin for the straw fits into the lower straight section
  • The short pin is used for the bent section of the straw
  • The pieces go in order from 1 through 5, with the final unmarked piece placed at the end
  • Piece 1 inserts into the head
  • For piece 2, attach the unmarked side to piece 1

  • Continue attaching each piece upward the same way until all parts are connected

     

Assembly Steps

• Attach the legs to the shorts using the pins
• Attach the legs to the knees
• Place the legs onto the boots while keeping him standing level, then glue them in place
• Attach the shorts to the body with the pin
• Insert the right hand into the right arm and glue it onto the body
• Insert the left hand into the left arm and glue it onto the body
• Attach the red trim to the top of the cup using the pins
• Attach the nose with the pins, then insert the eyes they are identical
• Insert the liquid piece into the cup, keeping the straw hole positioned slightly toward the back center of the head
• Build the straw following the instructions above and insert into the liquid. 
• Attach the head to the body and you’re all done

That’s it your Mega Cuphead mashup is complete. I hope you had a blast bringing this crossover to life. Be sure to share your finished prints and tag Playco3D so I can see your awesome creations. And don’t forget to visit my Patreon for tons of unique mashups and upcoming models. Happy printing! [https://www.patreon.com/cw/Playco3D/collections](https://www.patreon.com/cw/Playco3D/collections)