1/18/26 UPDATE! - A New Print Profile has been added for use with PLA as your support material with the Z Top Distance set as well for you. This should hopefully help many of you with support removal if you are Not using the Bambu Support for PLA filament.

If not using Support Filament you WILL need to adjust your support settings for the Z distance on your supports! Profile is set for printing with Support Filament!

Designed by a crocheter for crocheters! Created with comfort, style, and ease-of-use in mind, each hook is optimized for FDM 3D printers using PLA or similar filament. 

Post Processing is necessary for the hooks heads after printing. The amount of sanding needed will be dependent on your support settings! I highly recommend using a support filament

Included in the files.

• Both Long and Short sized Hook Handles
• "Blank"/Unnumbered STL Files for both Long and Short hook heads
• Numbered STL Files for use as modifiers
•  3MF file with modifiers
   

Printed myself with Bambu Labs X1C printer with a .12 layer height in basic PLA. For the best and strongest results, print horizontally on your build plate. Supports turned on WITH Bambu Support filament for PLA as support raft/interface.
If not using Support Filament you WILL need to adjust your support settings for the Z distance on your supports! Profile is set for printing with Support Filament!