Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This camera mount is designed for galvo laser heads that use two underside mounting screws spaced 125 mm apart.
Since the original screws on most galvo heads are too short, you’ll need slightly longer M4 screws to secure the bracket.
The camera holder can be tilted 180 degrees (up and down) to help you find the perfect viewing angle and center point on the laser bed.
Prints cleanly without supports, preferably in PETG with 4–6 walls to ensure strong screw joints.
Required Hardware
Camera Tilt Mechanism
• 1 × M4 nut
• 1 × M4 screw, 35 mm
• 1 × M4 washer
Mounting the Bracket to the Galvo Head
• 2 × M4 screws, 25–30 mm
Notes
• Designed for galvo heads with 125 mm screw spacing
• Support-free print
• PETG recommended for durability
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta