Hue Forge Tiger

if you need to adjust the size of the print make sure you keep the hight.

or it will not print correctly

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x184.38mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #a6a9aa PLA Jayo silver  Transmission Distance: 2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #9 (0.8mm) swap to BambuLab Basic Blue Gray
    At layer #15 (1.28mm) swap to Jayo silver
    At layer #20 (1.68mm) swap to BambuLab Basic Jade White for the rest.