Project: Sonic.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.64mm

Filaments Used:  (* = Owned)
    #000000 * PLA BambuLab Basic Black  Transmission Distance: 0.1
    #0086d6 * PLA BambuLab Basic Cyan  Transmission Distance: 2.4
    #ffffff * PLA BambuLab Basic Jade White  Transmission Distance: 5.8
    #c00d1e * PLA BambuLab Basic Red  Transmission Distance: 3.7
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Cyan
    At layer #13 (1.12mm) swap to Jade White
    At layer #19 (1.6mm) swap to Red
    At layer #27 (2.24mm) swap to Jade White for the rest.