This one's overdo - a troublesome, yet adorable Stitch to add to your reading.

Note: There is a pastel tone to the background using a high TD Bambu basic Jade White. If you want it whiter, use a Lower TD like Bambu Matte White.

Stitch Bookmark Set

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Cyan Transmission Distance: 3.5

PLA BambuLab Basic Jade White Transmission Distance: 4.6

PLA BambuLab Basic Hot Pink Transmission Distance: 3.9

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer (0.64mm) swap to Cyan

At layer (0.96mm) swap to Jade White

At layer (1.04mm) swap to Black

At layer (1.12mm) swap to Hot Pink

At layer (1.36mm) swap to Jade White for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.