Phone-Prison

This purpose for this device is to minimize you phone consume, when it is needed.

You set the timer on the clock and when you put the Phone on the platform the timer starts.

With the button you can set the timer up and reset it. You can also see the weather and the time on the LCD with the other button.

It is perfect for distraction free learning or to minimize you phone time. You can challange yourself to maximize the time.

Manual

-First print all needed parts

-Put some wires on the three buttons (solder or with mounts)

-glue the buttons in the three holes

-connect 4 wires to the LCD

-screw the LCD with the cover in place

-connect the cables with the ESP

 1.Controll Buttons→GPIO 26,25 and GND

 2.Preshure Plate Button → GPIO 33 and GND

 3.LCD → VCC to 3V, GNG to GND, SDA to GPIO 21 and SCL to GPIO 22

-install all libarys on the ESP and flash the code from the documentary

-fit in the cables and screw the bottom plate in

-put the button caps and the preshure plate in the model

I hope you enjoy