Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
 

The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.88mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
 

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Red
    At layer #18 (1.52mm) swap to Yellow
    At layer #28 (2.32mm) swap to Jade White for the rest.