Sidio Compatible Quarter Crate Dividers

Center Divider Available Soon! Quarter Crate is Also Available Here! Full crate sizes coming soon!

Follow Me to continue to get the updates on releases!

Due to how tight the tolerences are please use my print profiles. If you decide to use your own please be aware you are doing so at your own risk. Necessary parameters Print outer/inner order, 3 Walls, and for the T keys for the Center Divider please use a brim due to the two sharp corners (when applicable).

If you use Sidio Half Crates for storage and organization these are a perfect fit, print in place, and dividers require NO SUPPORTS. There are Full Width Span, and Half Width that fit perfectly. For Full Width, it may require Glue! I have tried snap fit like my quarter crate dividers but due to the height it was weak in the middle. This is a strong snap fit design, but with heavy use may loosen. For the Full Span multi part (single plate) you SHOULD use glue. For the half width dividers, you will need 1 center dividers. I will be adding a printable center divider for the half crate shortly.

I have printed and use these with PLA, PETG and PLA Tough+. I haven't seen any real difference between them and primarily use the PLA to reduce cost. If anyone is interested in other filaments for any reason, just let me know and I can add my profiles.

Instructions for Full Width Divider

1. Apply Glue to the snap track and on the surface.

   

2. Snap fit the other side.

   

3. Clamp until Dry

Enjoy and stay tuned for the center Divider update for Half Sized Crates and the Dividers for Full Sized Crates.