This is a minimalist, low-profile circular base designed to cover your existing ceiling electrical box and provide a clean mounting point for a single or multiple pendant lights

Size: 150mm Round by 26mm Height

.

💡 Quick Assembly:

1. Attach the rectangular Mounting Bracket to your ceiling  using two screws.
2. Route the pendant light cable through the center hole of the Circular Mount Base.
3. Fit the Circular Mount Base onto the bracket and secure it to the ceiling.You can use self tapping or drywall screws(make sure they are not too long).

4. 

 If you like to change the size of the central hole click on the negative part and change to your own size:

If you want to have more than one hanging light(for example on one of my prints i have 4 lights hanging as you can see on one of the photos) you can add more by clicking on the object and adding negative part.

Always ensure electrical safety and proper wiring installation.

3. Print Settings Summary

• Filament: PETG (Recommended) or PLA.
• Layer Height: 0.20 mm.
• Infill: 15% - 20%.

• Supports: None needed.

   

  Any questions don`t hesitate to ask me.