I referred to many top-mount solutions for AMS Lite, but none of them met my needs. So I made one myself that can be printed in a single batch. It’s easy to install—just clip it directly onto the A1 gantry, and it’s extremely stable. All the screws are taken from the AMS Lite: the longer ones are used to fasten the shell, while the shorter ones are for the feeder module and the mainboard.

⚠️⚠️ Installation Notes! Be sure to follow the installation sequence! ⚠️⚠️

1. Disassemble the AMS Lite (refer to the official Wiki for specific disassembly and assembly instructions).
2. Insert the "1, 2" feeder modules into the left shell (make sure not to reverse them), and fasten them with two small screws.
3. Arrange the red flat cable, connect it to the mainboard, and secure the mainboard with three small screws.
4. Insert the "3, 4" feeder modules into the right shell (make sure not to reverse them). ⚠️⚠️ Do NOT fasten the screws yet! ⚠️⚠️
5. Connect the blue flat cable and tidy up all the wiring harnesses.
6. Use six long screws to join the two shells together.
7. Fasten the "3, 4" feeder modules with two small screws.

参考了好多amslite的顶装方案，没找到自己想要的那种，自己做了一个一盘打印，简单安装，直接卡在A1的龙门架上，非常温稳固(螺丝都是amslite上拆下来了，长的拧外壳，短的用来拧进料口模块和主板)

⚠️⚠️!安装注意 !一定要看安装顺序 !⚠️⚠️
第一步:拆amslite(具体拆装可以看官方WiKi)

第二步:把“1、2“进料模块插到左壳体里面(注意别插反了)，用两个小螺丝拧上

第三步:整理红色排线，插上主板，把主板三颗小螺丝拧上

第四步:把“3、4“进料模块插到右壳体里面(注意别插反了)⚠️⚠️!先别上螺丝!⚠️⚠️
第五步:插上蓝色排线，整理线束
第六步:用六个长螺丝，把两个壳体连接
第七步:拧上“3、4“进料模块的两个小螺丝