Hi Everyone!

This is a project I've been working on for a while. I wanted to find a way to play retro games in a modern format without paying a premium for a good console. In this project, I've found a way to game using modern controllers through the power of Joy-Cons and RetroPie!

Components:

• 1x Raspberry Pi 3b, 4b, or 5b [Or Raspberry Pi 2b With Wifi Dongle]
• 1x Hosyond Raspberry Pi 7-inch Capacitive Touch Display: [[https://www.amazon.com/dp/B0BKGCB18T?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1](https://www.amazon.com/dp/B0BKGCB18T?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)]
• 1x Raspberry Pi WaveShare UPS Uninterruptible Power Delivery Hat: [[https://www.amazon.com/dp/B08BRPLY15?psc=1&smid=A50C560NZEBBE&ref_=chk_typ_imgToDp](https://www.amazon.com/dp/B08BRPLY15?psc=1&smid=A50C560NZEBBE&ref_=chk_typ_imgToDp)]
• 4x 2.5mm Screws
• 4x 2.5mm Nuts
• 2x 18650 Li Batteries

Assembling the Components:

• Slot Screen into 3d Printed Part
• Pre screw each of the screws by screwing the nut to the screw head for extra surface area
• Screw the modified screws into the chassis, making sure to align with the threads of the screen
• Slot two screws into the Raspberry Pi  on adjacent corners and tighten them until they have loose contact with the board
• Slot two standoffs into the Raspberry Pi from the UPS hat and screw them in on the other side with the included nuts
• Screw the Raspberry Pi into the screen
• Slot in the UPS hat to the Raspberry Pi's gpio
• Screw in the Ups Hat
• Enjoy!