Wade & Ember Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: [https://buymeacoffee.com/heyben](https://buymeacoffee.com/heyben)

Wade & Ember Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 3.84mm and the Actual Thickness is 3.48mm

Filaments Used:
    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #ffff7c PLA BambuLab Basic Yellow Transmission Distance: 5.2
    #5e43b7 PLA BambuLab Basic Purple Transmission Distance: 1.8
    #67b4ff PLA BambuLab Basic Cyan Transmission Distance: 2
    #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.6
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.7
This print uses 7 unique filaments

***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.04mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions:
    Start with Black
    At layer #4 (1.24mm) swap to Red
    At layer #14 (1.64mm) swap to Yellow
    At layer #27 (2.16mm) swap to Black
    At layer #29 (2.24mm) swap to Purple
    At layer #34 (2.44mm) swap to Cyan
    At layer #39 (2.64mm) swap to Hot Pink
    At layer #46 (2.92mm) swap to Jade White for the rest.

Check out my Anime Collection here

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Descrição