Ghost Rider hueforge

Project: GHOST RIDER.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.26x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA #eSUN Basic Black  Transmission Distance: 1
    #536c8b PLA #eSUN Basic Grey  Transmission Distance: 3.2
    #ff0000 PLA+ #DEEPLEE Basic Red  Transmission Distance: 8
    #ffff00 PLA+ #DEEPLEE High Speed Yellow  Transmission Distance: 9.6
    #f5faff PLA #eSUN Basic Cold White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with #eSUN Basic Black
    At layer #6 (0.56mm) swap to #eSUN Basic Grey
    At layer #8 (0.72mm) swap to #DEEPLEE Basic Red
    At layer #12 (1.04mm) swap to #DEEPLEE High Speed Yellow
    At layer #20 (1.68mm) swap to #eSUN Basic Cold White for the rest.