Hi, this is a project for a Logitech C920 webcam print. It's my idea; I simply needed a stand, so I designed my own. The stand has a swivel base and double-sided, breakaway connectors. It's universal and can be used with a variety of cameras. All screw holes are 6mm in diameter. The swivel hole is 6mm in diameter and has an M6x1 thread. I used M6x1 threads everywhere. For mounting, you'll need to buy 6mm screws, which I happened to have. To mount the camera, I used a 1/4-inch screw with a length of 17.5mm, because that's what I had. I also made Allen keys and M6x1 threads for the screws. You can see everything in the photos.

Check out my other projects.

[https://makerworld.com/pl/@fokusduszek/upload](https://makerworld.com/pl/@fokusduszek/upload)

Leave a comment and a picture of your print, and if possible, give it a thumbs up.

Thank you.