If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

This Stranger Things–inspired bookmark captures the eerie vibe of the Upside Down, with a silhouette falling through a shattered window into a ruined, textured room. 🕳️ The vertical composition and broken glass details give it a cinematic feeling, perfect for fans who want a bit of suspense tucked into their current read.
 

At the top, the tassel hole is shaped like a light bulb, a subtle nod to one of the key plot elements in the series and a fun detail that makes the design instantly recognizable to other fans. 💡

Maker notes:

• While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️

   

• Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

   

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4 / Amazon
PLA KINGROON Purple Transmission Distance: 2.8 / Amazon
PLA+ EryOne Magenta (HyperSpeed) Transmission Distance: 3.3 / Amazon
PLA KINGROON White Transmission Distance: 5.3 / Amazon

Color Pallete:

Swap Instructions:

Start with Black
    At layer #8 (0.73mm) swap to Purple
    At layer #10 (0.89mm) swap to Magenta
    At layer #15 (1.29mm) swap to White for the rest.