Squirtle evolutions bookmark. This goes great with the other Kanto starters and is perfect to be displayed with your favorite pokemon.

Check out our other pokemon designs in the pokemon collection.

Project: squirtle.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.04x150.03mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm

Filaments Used:
    #4d3324 PLA BambuLab Matte Dark Chocolate  Transmission Distance: 0.1
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 1.2
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Dark Chocolate
    At layer #11 (0.96mm) swap to Cobalt Blue
    At layer #15 (1.28mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Jade White for the rest.