Project: predatorbig.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 233.46x330mm in size

You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 4.24mm and the Actual Thickness is 4mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #062b4d PLA PolyTerra Army Blue  Transmission Distance: 0.3
    #0066d9 PLA PolyLite Azure Blue  Transmission Distance: 3
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #dede00 PLA PolyLite Lime Green  Transmission Distance: 3.5
    #f1d335 PLA PolyLite Lemon Yellow  Transmission Distance: 6.5
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #f5f0ec PLA Panchroma Satin White  Transmission Distance: 3.8
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Army Blue
    At layer #19 (1.6mm) swap to Azure Blue
    At layer #23 (1.92mm) swap to BambuLab Green
    At layer #27 (2.24mm) swap to Lime Green
    At layer #33 (2.72mm) swap to Lemon Yellow
    At layer #37 (3.04mm) swap to Red
    At layer #45 (3.68mm) swap to Satin White for the rest.