12/6/2025: ***ADDED A MODEL/PROFILE FOR PROVIDING 1" OF CABLE RELIEF BETWEEN THE TABLE AND WALL.***

12/8/2025: ***NOW SUPPORTS BOTH SANDWICH MOUNTING OR MOUNTING BELOW THE LEG FLANGE TO NOT RAISE THE TABLE.***

My Children were asking for me to strengthen our table and eliminate the wobble as when they were both coloring the table would move and aggravate them. Seemed like a great opportunity to scratch one more thing to fight about off the list! So here we go, a wall-mounted stabilizer to eliminate the wobble from the table!

• No supports needed!
• Two options to mount:
  • Sandwich the stabilizer between table and leg (a little stiffer, no need for washers, but raises table 4mm). Use the included spacers.
  • Mount the stabilizer below the table leg (slightly less stiff, may or may not need washers, does not raise the table).
• 100% Infill around the wall anchor holes! (via modifier built into the 3MF File) This makes it stronger and allows you to drill it out if you'd like to use larger anchors!
• Works with any 5-hole bolt pattern ADILS legs, and any IKEA table that accepts them!
• If I hit 50 boosts, I'll create a version that is easily detachable from the wall!
• I recommend EZ-Anchor 75lb wall anchors. These are available at nearly every big-box home improvement store and even Walmart, at least around here.

Please let me know if you have any questions or concerns, and of course I appreciate any and all comments! Thanks for checking out my design!