灵感来源于 [https://makerworld.com/zh/models/729262-screw-storage-box-2-0](https://makerworld.com/zh/models/729262-screw-storage-box-2-0) ,这是一个非常好用的模型,但是但是我的有些东西需要的尺寸超过了文件内置现有的盒子,所以自己重新建模了个可以参数化的模型文件

需要注意的是,虽然我设置了圆角的上限为6,但是在0.8mm厚度的情况下超过2.7mm的时候模型会不正常,所以建议生成并打印前先检查一下后面是否有裂缝,我打算过段时间再修复这个问题
该模型已取得得原作者 @EricYC 的同意发布

This translation was generated by AI.
Inspired by [https://makerworld.com/zh/models/729262-screw-storage-box-2-0](https://makerworld.com/zh/models/729262-screw-storage-box-2-0). It’s an extremely useful model, but some of the items I have require dimensions larger than the built-in box sizes, so I rebuilt a fully parametric version myself.

Please note: although I set the maximum fillet radius to 6 mm, the model becomes abnormal when the wall thickness is 0.8 mm and the fillet exceeds 2.7 mm. Therefore, I recommend checking the generated model for cracks before printing. I plan to fix this issue later.

This model is published with the permission of the original author, @EricYC, but due to the original model’s settings, I’m unable to mark it as a derivative work.