The idea behind this snowball press is that you can not only press, but also rotate it to remove excess snow from the press. The advantage over conventional snowball presses is that you don't have to worry about how much snow is in the press when filling it.

Procedure:

1. Fill the higher part (in my case, the white one) with snow.
2. Attach the smaller part and compress the snow with a little pressure.
3. Then turn and press simultaneously until you reach the stop to form the snowball and remove excess snow with a twisting motion.

See GIF in the gallery

Diameter:

The Snowball press forms snowballs with a diameter of 70mm

Print settings:

Standard (0,2mm layer height / 15% infill)

3 Walls