It's SNOW TIME! This beautiful snowflake is fun to twirl around. Easy to assemble and quick to master, it's sure to bring a smile to anyone who plays with it. It's satisfying to look at, and it has a nice ASMR sound when you “flip and flap” it back and forth. It's perfect for winter parties and goodie bags!

I used Bambu PLA Gradient Arctic Whisper and a smooth effect plate to get my results.

A couple of tips: 

1. Good bed adhesion is important for this print. I recommend using a smoothe PEI plate or effects plate. 
2. The propellers and stem can warp if there is a draft or poor bed adhesion. This will cause them to not spin properly. Please check your propellers BEFORE you glue anything.
3. Depending on the filament you use, and how accurate your printer is, you might need to use a de-burring tool or sand paper to slightly shave down the stem where the propellers rest. 
4. You'll need to use a drop of glue to attach the snowflake topper. DO NOT get any glue on the top propeller.  
5. Make sure to leave about a paper width of space between the top propeller and the snowflake. If you don't, it won't spin.
6. I have added a brim to the stem to help with bed adhesion. 
7. There are 24 propellers, but you only need 23. I added a spare in case one warps or messes up while printing. They are all the same size, so it doesn't matter which order you put them on the stem.

Disclaimer: This toy contains small parts that may pose a choking hazard. It is not intended for young children, or for people who may put non-food items into their mouth.

If you like this item, check out my other “Flip Flap” fidgets: [https://makerworld.com/collections/10569526](https://makerworld.com/collections/10569526)