Use any refill in any refillable spool!

With this customizable adaptor you can use any refill in any refillable spool without having to print new spool (obviously as long as the inner diameter of the refill is bigger than the diameter of the spool 😉)

Please, put in the comments the refills and spools you're using and its dimensions to help everybody! 

Inner diameters

new SUNLU→ 82mm

BAMBU → 83mm

Outter diameters

SMARTS MATERIALS → 100mm

Its use it's simple

1. Measure the diameter of the spool (for BAMBU and new SUNLU  Spools outter diameter should be set to 82 -83mm)
    

   
    

2. Measure the inner diameter of the refill, this will be the inner diameter value (recomended to set it to 1mm more than the measured valued to maintain presure between adaptor and refill)
    
3. Measure the inner witdh of your spool and set the height of the adaptor (important to set it correctly or the spool won't clip!)
    

4. Once printed, put the adaptor in the refill 
    

   

5. Insert the refill + adaptor to the spool. BE SURE THE SLOT IN THE ADAPTOR ENTERS IN THE SPOOL PIN (otherwise you won't be able to clip both sides of the 

   

6. Clip both sides of the spool and print!