HSW Shelf/Tray

Hey guys, here is my 3rd TinkerCAD design.

Its a Honeycomb storage wall shelf or tray, whatever you want to call it.

The inner part of the shelf measures at 164mm x 95.3mm.

Outer part measures at 170mm x 112.7mm.

Print time is about 1 hour 45 min with Generic PLA, and about 15 minutes less with Bambu basic PLA.

The tolerances are nice and tight but will loosen a bit with time. I made it for a 20 color Swatch holder I made (in pics), if you all want the files for the holder let me know and I'll upload them.

Here are the swatches I use by Jonas → [https://makerworld.com/en/models/437497-filament-sample-and-display-for-colour-combination#profileId-342705](https://makerworld.com/en/models/437497-filament-sample-and-display-for-colour-combination#profileId-342705)

You will need to print out inserts for this, my favorite are these made by Wile E. 3D → [https://makerworld.com/en/models/677792-ez-lock-insert-for-honeycomb-storage-wall#profileId-605967](https://makerworld.com/en/models/677792-ez-lock-insert-for-honeycomb-storage-wall#profileId-605967)

If you guys have any issues or have questions, don't hesitate to message me. Thanks and happy printing :)

Descrição