This is a wall-mounted shelf bracket designed with structural ribs for strength while keeping the print lightweight. It attaches easily to any wall and supports shelves made from wood, MDF, acrylic, or 3D-printed material.

Each bracket can safely hold up to 8 kg when installed using the correct wall plugs.

Screw Size

• All screw holes are designed for 5 mm screws
  (Use 5 mm screws + suitable wall plugs for maximum strength)

Features

• Up to 8 kg load capacity per bracket
• Lightweight but strong ribbed geometry
• Smooth edges and clean design
• Easy installation with standard 5 mm screws
• Works with all shelf types

Recommended Print Settings

• Layer height: 0.2 mm
• Infill: 20%
• Material: PLA, PETG, ABS, ASA, etc 
• Perimeters: 2-3 walls recommended
• Supports: Minimal or none depending on print orientation