Summary

It's a simple GPU stand, made of a screw and a base.

No supports are needed.

The design allows for the height to vary between 60mm and 90mm, but for stability, I would not recommend it above 85mm.
The screw fits fairly loose in the hole, but because of the angle of the thread, it probably will not move under the force of the GPU.
I could not find one that worked for my range of GPU height so I hope this can help people!

If you want to make it for yourself i suggest you download the .f3d and remove just a bit of clearance so it fits more tightly, make sure to post it as a remix of this if you do so that it helps other people aswell.

Print Settings

Printer Brand: 

Anycubic

Printer:                     

Kobra 2

Rafts: 

Yes

Supports:                     

No

Resolution: 

0.2mm

Infill:                     

20%                 
                        

Notes:                    

Although I used 20% infill, 10% might work just as well because of the little weight it has to hold.