Summary

Simple but effective mount for the Raspberry Pi Camera.

Please note this was designed for the V1 camera module. From pictures only, the V2 looks to be similar dimensions but it has not been tested on V2.

This does not fit camera module V3.

• Snap fit camera board case.
• Hardware free adjustment with printed wing nuts.
• Profile mount takes 2 x M3 Socket Cap screws. 6-8mm long recommended for 2020/V-slot profile mounting.

All threads are ISO M14 if you wanted to add accessories or design a different mount plate.

No support required. There is a short bridge on the camera case that all printers should be able to handle.

Print as many or as few arms as you need with extra wing nuts as required. Pictures show 2x arms and 4x M14 Nuts, one each of everything else.