Controller updated hueforge

Project: Controller updated hueforge.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 190.82x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.1
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Jade White for the rest.

Descrição

Controller updated hueforge