Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 114.29x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2mm

Filaments Used: 
    #000000 * PLA+ Esun Black  Transmission Distance: 0.5
    #282b43 * PLA+ Esun Dark Grey  Transmission Distance: 1.5
    #6f7779 * PLA+ Polyterra Grey  Transmission Distance: 2
    #ffffff * PLA+ Esun White  Transmission Distance: 10
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Dark Grey
    At layer #9 (0.8mm) swap to Grey
    At layer #13 (1.12mm) swap to White for the rest.