Hueforge Cheetah 

I used Bambu Basic Black, Orange, Yellow and Jade White

File is set at 200mm x 200mm but can be changed, do not change the height (Z axis). Colors can be changed to suit your needs.

Check out my bio for info on commercial rights. 

The files cannot be sold, shared or transferred in any way ever.

Project: cheetha blk org yel wht.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #ff6a13 PLA BambuLab Basic Orange  Transmission Distance: 5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Orange
    At layer #19 (1.6mm) swap to Yellow
    At layer #21 (1.76mm) swap to Jade White for the rest.