Playstation Logo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm

The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.36mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue Transmission Distance: 4
    #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
    #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Blue
    At layer #16 (1.36mm) swap to Turquoise
    At layer #19 (1.6mm) swap to Sunflower Yellow
    At layer #26 (2.16mm) swap to Red
    At layer #35 (2.88mm) swap to Jade White for the rest.

Descrição