This product is inexpensive, and together with Bambu’s documentation, it allows you to experiment with all the individual settings for your specific machine and filament.
Overhang: [https://wiki.bambulab.com/en/filament-acc/filament/print-quality/overhang](https://wiki.bambulab.com/en/filament-acc/filament/print-quality/overhang)
Stringing: [https://wiki.bambulab.com/en/filament-acc/filament/print-quality/stringing-oozing](https://wiki.bambulab.com/en/filament-acc/filament/print-quality/stringing-oozing)
Moisture: [https://wiki.bambulab.com/en/filament-acc/filament/dry-filament](https://wiki.bambulab.com/en/filament-acc/filament/dry-filament)
Thanks to Bambu for the detailed descriptions.
-eSun Silk Aqua PLA was stringing a lot for me. Solution: I use 220 °C for the first layer, and 190 °C for all other layers. I would start with this, and only then adjust the other variables, because this gives the most visible improvement. It is recommended to reduce the temperature in 5–10 °C steps.